Mr. Finishing Surfacer 1000 Mahogany 40ml - SF290

Surfacer for brush/airbrush

Reference:
ED_SF290
€8.33
In stock
Description

The product range is supplied either in a spray gun bottle or in an aerosol.

Apply in a light coat with a spray gun or spray on a dry and degreased model surface.

To seal joints and rough areas of the model, apply topically with a brush in several coats.

Do not thin.

After drying, sand with fine sandpaper under water at 800 -1000 grit. Repeat the whole process if necessary.

For fine sealing, spray with a spray gun or aerosol.

If using a spray gun, thin with Gunze Mr.COLOR THINNER thinner as required. The recommended dilution is 1.5:1 to 2.5:1 (by volume, thinner:sealer).

Do not use other thinners.

A properly sprayed surface is semi-matt, smooth, light grey.

A light coat of Mr. Surfacer will highlight imperfections, dips, scratches and surface irregularities. Sand these areas with fine sandpaper under water and re-spray. Repeat the process as necessary.

The surface treated in this way can be polished to a high gloss, which is particularly important when applying Mr.Metal Color paints.

For polishing, use fine sandpaper or 4000 grit canvas and polishing felt.

Polishing pastes can also be used.

Data sheet

Base
Lacquer
Use for
Airbrush

Menu

Settings

Click for more products.
No produts were found.

Create a free account to save loved items.

Sign in